GranitoArt

Interior and exterior walls, interior facades; gypsum plaster can be applied on gypsum board by priming with mineral surfaces such as black plaster, concrete, old painted surfaces (water based) and GRANITO ASTAR product.

GRANITO CILA, which is specified in the application instructions, can also be used on difficult surfaces such as bathroom and kitchen if surface protection is provided.

The application surfaces should be cleaned from dust, dirt and oil, and the old and blistered paint layers should be cleaned and made dry, sound and clean. At least 28 days should be allowed to cure the surface before application on new mineral surfaces. All insulation measures for water must be taken.

Old synthetic based surfaces should be thoroughly sanded and the sanding dust should be removed from the surface.

If necessary, apply cracks on the surface with TEKNOREP.

20 kg GRANITO WALL 4.5 - Empty with 5.5 liters of clean water and mix until no more lumps are left. GRANITO WALL in white can be colored with colorants.
Allow the mortar to mature for 1-3 minutes, mix again before starting the application. GRANITO WALL 2 or 3 coats are applied on the prepared surface as specified in the application instructions with steel trowel, waiting for 3-4 hours between the coats. The total application thickness should be 2-4 mm. The GRANITO WALL pattern is supplied with a steel trowel and / or effect trowel. Brightness and pattern can be obtained by hard pressing with a trowel on the top coat application or by sanding 1 day after the top coat application. 2-3 days after the application is completed (full drying), the entire surface should be treated with GRANITO POLISH according to the place of use and shape.